QUALITY ASSURANCE OF PCB ENCAPSULATION

Once the dangerous PCB´s have been sealed and enclosed, it is important that you perform a thorough quality control of the PCB encapsulation that has been made.
To ensure that you have sealed or encapsulated the caukling containing PCB´s or surface correctly, a high quality assurance is required. This is also crucial if you as a builder or advisor will avoid having a very heavy burden of proof if the encapsulation is not performed correctly and does not work.
Contact TWO Teknik if you need help or advice on quality assurance of PCB encapsulation. We are here to help you.

NOTE: It is not enough that the encapsulationmaterial – in itself is able to seal the PCB´s  – unless the work is done correctly. The correct layer thickness must be applied and you must make sure to avoid “dry spots” in the layers. In addition, all quality assurance of PCB encapsulation must be documented and verified.kvalitetssikring af PCB forsegling. Vi sidder klar til at hjælpe dig.

QUALITY ASSURANCE OF ENCAPSULATING PCB´S

Vi We have several years of experience with PCB´s and performing quality assurance of PCB encapsulating.

Hvis If you need help or guidance, contact an expert from TWO Teknik.

We are ready to help you.

THE BEST QUALITY ASSURANCE OF A PCB ENCAPSULATION

Here at TWO Teknik, the quality assurance is great a task itself. We have developed our quality assurance program for more than 10 years.
With the SPS Primary products, we offer the market’s most solid quality assurance. At TWO Teknik, quality assurance is structured such that the contractor performs one part of the task, TWO Teknik performs another part and the consultant carries out the final part of the quality assurance.
In this way, there is 100% transparency throughout the quality assurance – for everyone’s advantage and satisfaction.
TWO Teknik always provides thorough instruction and guidance when using the SPS Primary products, to ensure that they are used 100% correctly. This ensures that the desired and expected results are also achieved. TWO Teknik also provides assistance with ongoing quality control and subsequent documentation.

OUR QUALITY ASSURANCE

Coloured layers

Individually coloured layers to ensure correct number of layers – performed by the entrepreneur

Layer thickness

Control of correct layer thickness during appliance -performed by the entrepreneur

Control

Control of the layer thickness med ultrasound, after curing – performed by TWO Teknik

Verification

Tracer substance to verify the effect – performed by the entrepreneur and assured by the consultant

KQUALITY ASSURANCE OF PCB ENCAPSULATION WITH EACH LAYER IN DESIGNATED COLOR

At TWO Teknik we offer to tone our sealing products in almost basic colors. In this way, each layer can be clearly defined by having their own color.
This makes it very easy to document whether one or more layers of sealing have been applied and at the same time check whether there are any “dry spots” during the application .
Our sealing products are delivered as transparent and we offer both  toning or delivery of color powders so that you apply the powder on the spot and in the desired colors and quantities.

QUALITY ASSURANCE OF PCB ENCAPSULATION – LAYER THICKNESS

When ordering SPS Products from TWO Technique, layer thickness gauges are always included. These gauges show quickly and easily whether the desired layer thickness is achieved at the measured location. If the meter shows the correct layer thickness, a picture of the meter is taken at the given location to prove that the seal has the correct thickness of the sheet.
If the meter does not show the desired layer thickness, apply another layer of PCB Seal and another measure is made. The meter can be wiped and reused on another surface that is wanted to be verified.

This check is performed while the seallant is uncured and is performed by the entrepreneur.

 

 

QUALITY ASSURANCE OF PCB ENCAPSULATION AF PCB FORSEGLING – OUR CONTROL

Hos TWO Teknik tilbyder vi at efterprøve lagstykkelsen af forseglingen, efter at forseglingen er hærdet.

We offer to verify the layer thickness of the encapsulation after curing.

This is made with ultra sound scanner, that reveals the exact layer thickness at the point measured.

All measurements/verifications will be recorded and can be used to document the quality of the work.

 

kvalitets sikring af pcb indkapsling

Hvis du har brug for vejledning vedrørende PCB Forsegling, så kontakt en PCB-ekspert fra TWO Teknik.

Vi sidder klar til at hjælpe dig.

Vil du se vores guide til PCB Forsegling?

QUALITY ASSURANCE OF PCB INCAPSULATION WITH TRACER SUBSTANCE

The tracer substance, SPS Seal Trace, is our unique, and most comprehensive quality assurance tool. SPS Seal Trace is developed and patented by TWO Teknik. The tracer is in liquid form and applied to the surface in an exact amount before the sealing is performed. SPS Seal Trace is only offered with SPS seal products.
SEAL TRACE has the same properties for diffusion as PCB´s, and a boiling point similar to the light PCB congener / types of PCB. Therefore, the tracer will have the same preconditions for penetrating a sealed/encapsuled surface as the PCB´s.
The tracer is unique and does not exist in any natural form in our environment, and for that reason it will certainly be concluded that a trace of SPS Seal Trace in the air will come from leakage in the sealant, and therefore the seal will also allow diffusion of PCB´s. With this unique and patented method a cause to a new detection of PCB can be concluded. 
The unique composition of the SPS SEAL TRACE enables it to be easily identified at any event. It can even be measured for SPS SEAL TRACE while measuring for PCB´s in the air. Both substances are analyzed in a GC/MS (Mass spectra) and can even be sampled and traced simultaniously.

ER SPORTSOFFET SÅ EN SLAGS PCB?

Nej, Vores sporstof SPS SEAL TRACE, er udviklet til at have mange ligheder med strukturen af PCB, men helt uden de dioxin-lignende egenskaber, som netop gør PCB farlig.

Med sporstoffet SPS SEAL TRACE kan du til enhver tid teste effekten af den forsegling af PCB der er foretaget. Selv mange år efter forseglingen er udført.

SPS SEAL TRACE er ufarligt for helbredet og miljøet og et meget nøjagtigt værktøj til kvalitetssikring af PCB indkapsling.

SAMARBEJDSPARTNERE

Vi er stolte over vores samarbejde med de bedste entreprenører.

PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
PCB Vejledning
KAN VI HJÆLPE?

Har du spørgsmål, så skriv til vores eksperter her.

Vi svarer altid hurtigt.

Du kan også ringe direkte på telefon +45 72302031.

Ønsker du større partier, så kontakt os på +45 72302031 og få en pris Dismiss